|
model |
px9 |
px7 |
px2 |
px3 |
|
appearance
din(mm)
(w)】(h)】(d) |
96】96】100 |
72】72】100 |
48】96】100 |
96】48】100 |
| function |
·fuzzy function ·auto-tuning pid ·external contact input ·reverse/direct se-lectable ·heater break alarm(hba1, hba2) ·zone pid ·alarm output ·ramp ＆ soak ·interface(rs 485/422) ·protection(front facia ip65) ·group pid ·multi input-output ·output limit function ·set point value 3 steps |
|
input |
thermo couple: k, j, e, t, r, s, b, l, n, u.wre 5-26, pl-弗
r.t.d : pt 100目, kpt 100目
direct voltage: 1…5v, 1…10v, -10…20mv, 0…100mv(programmable scale type) |
|
sampling time |
250ms, (when remote option: 500ms) |
| cold junction temperature compensation tolerance |
【1.5∩(15…35∩), 【2.0∩(0…50∩) |
|
input impedance |
t/c and mv input :1 m目 min, dc v: 1m目 |
|
lead wire tolerable resistance |
r.t.d: 150目max. / wire |
|
input tolerable voltage |
【10v(t/c, r.t.d, voltage: mv dc) 【20v (voltage: v dc) |
|
noise removal rate |
nmrr(normal mode): 40db min. cmrr(common mode): 120db min, (50/60hz 【1%) |
|
standard |
t/c, r.t.d: ks, iec, din |
|
scaling |
according to setting max. voltage(sh), min. value(sl) of measurement range, scaling is available(-1999…9999) |
|
standard junction temp. compensation tolerance |
【1.5∩(15…35∩), 【2.0∩(0…50∩) |
|
burn-out |
t/c : off, up/down se-lectable
r.t.d: off, up/down se-lectable(detection current: 50na) |
|
accuracy |
【0.1%(full scale) | |
|
model |
nx9 |
nx7 |
nx2 |
nx1 |
nx3 |
nx4 |
appearance
din(mm)
(w)】(h)】(d) |
96】96】100 |
72】72】100 |
48】96】100 |
48】24】100 |
96】48】100 |
48】48】100 |
|
function |
·fuzzy function ·auto-tuning pid ·external contact input ·interface(rs 485/422) ·protection(front facia ip65) ·zone pid ·alarm output ·output limit function ·set point value 3 steps ·group pid ·multi output ·reverse/direct se-lectable heater break alarm(hba1) |
|
input |
thermo couple: k, j, e, t, r, s, b, l, n, u.wre 5-26, pl-弗
r.t.d : pt 100目, kpt 100目
direct voltage: 1…5v, 1…10v, -10…20mv, 0…100mv(programmable scale type) |
|
sampling time |
250ms |
|
cold junction temperature compensation tolerance |
【1.5∩(15…35∩), 【2.0∩(0…50∩) |
|
input impedance |
t/c and mv input :1 m目 min, dc v: 1m目 |
|
lead wire tolerable resistance |
r.t.d: 150目max. / wire |
|
input tolerable voltage |
【10v(t/c, r.t.d, voltage: mv dc) 【20v (voltage: v dc) |
|
noise removal rate |
nmrr(normal mode): 40db min. cmrr(common mode): 120db min, (50/60hz 【1%) |
|
standard |
t/c, r.t.d: ks, iec, din |
|
standard junction temp. compensation tolerance |
【1.5∩(15…35∩), 【2.0∩(0…50∩) |
|
burn-out |
t/c : off, up/down se-lectable
r.t.d: off, up/down se-lectable(detection current: 50na) |
|
accuracy |
【0.5%(full scale) | |