雕刻機電子手輪 手脈 手搖脈沖發生器LHB04說明書
The Manual For Fully functional Handle for Engraving machine
Model：LHB04
版本號（Version）： V1.0
一.外觀結構說明 （Structure Description）
二.直流電氣特性（DC Description） | 產品名稱
Name | 工作電壓
Voltage | 工作電流
Current | 備注
Note |
| 電子手輪 | 4.5V—5.0V | 小于 100mA
Less than 50mA | |
三. LHB04手輪使用說明
Operating Instructions of LHB04
LHB04手輪驅動安裝
LHB04 SET UP
1. 安裝了MACH3后,在MACH3安裝目錄下有個 “PlugIns” 文件夾,如果沒有請建一個名為”PlugIns”的文件夾.然后把驅動文件XHC-ShuttlePro.dll拷貝到此文件夾\Mach3\PlugIns下.
When Mach3 is installed , there will be a folder created named “PlugIns” in the Mach3 folder. This folder is the location to put and Plugin files that you want Mach3 to know about. Place“XHC-ShuttlePro.dll” in the \Mach3\PlugIns folder. Check and make sure it is there.
2. 插入MACH3 手輪的usb控制器到計算機的usb口.**次時,計算機會提示發現新硬件,并自動安裝控制器需要的驅動.
Now that the XHC-ShuttlePro.dll file is in \Mach3\PlugIns, the next step is to connect the ShuttlePro. If you are certain that your ShuttlePro is working and your hardware is working then you can simply plug in the ShuttlePro to one of the USB ports.
3. 打開mach3軟件,在“Config”配置菜單下,選擇”Config Plugins”配置插件.在彈出的配置插件窗口中,將” ShuttlePro-XHC-FOR-MACH3…”enable使能,這時會看到到有綠色的鉤.然后點黃色的”config”配置按鈕,會彈出鍵的配置窗口,在配置窗口中,你可以選擇每個按鍵的功能.如果不選擇,全部的按鍵將是默認功能.
Once the ShuttlePro is connected, start Mach3 and go to the “Config” menu choice and select “ConfigPlugins”. You should see the ShuttlePro choice with a green checkmark in front of it. If it is not checked, you can check it. The checkmark means that Mach3 found the ShuttlePro on startup. Click the“CONFIG” in yellow and set the buttons as you wish.
4. 退出配置窗口后, MACH3 手輪就能正常使用了.在mach3軟件使用前,你需要按”Reset”復位鍵,mach3軟件才能正常使用.
Once you have the proper button selected in the Mach3 ShuttlePro Plugin CONFIG menu, your Shuttle device should be working properly.
四. 使用功能描述（Features Description）
A．按鍵功能描述（Button Features Description） 
B．窗口顯示描述（LCD Display Features Description）
坐標值顯示窗口：（Coordinates of the window）
C. 按鍵功能列表（Key function description）
對應圖標
Corresponding icon | 名稱
Name | 按鍵功能描述
Key function description |
 | 停止按鈕
Stop button | 按下該鍵，停止機床
Press the button to stop machine |
 | 開始/暫停按鈕
Start / Pause button | 機床處于運行狀態，按下該鍵，機床暫停加工機床處于暫停狀態，按下該鍵，機床繼續運行
Machine is running, press the button, the machine to suspend processing,Machine is paused, press this button, the machine continues to run |
 | 倒退
Rewind | 返回到程序的開始
return to the program start |
 | 復位
Reset | 復位程序
reset program |
 | 回工件原點按鈕
Back to the origin Button | 按下該鍵，機床執行回工件原點操作
Press this key piece back to the origin of the implementation machine |
 | X分中按鈕
X Coordinates 1 / 2 Button | 將X工件坐標分中
X Coordinates 1 / 2 |
 | Y分中按鈕
Y Coordinates 1 / 2 Button | 將Y工件坐標分中
Y Coordinates 1 / 2 |
 | Z**高度設定
Z Coordinates 1 / 2 Button | 將當前Z軸的工件坐標做為Z軸的退刀點
Z Coordinates 1 / 2 |
 | X=0按鈕
X oordinates=0 Button | 將當前坐標設置為X軸工件坐標
X coordinate is set to the current Workpiece coordinates axis |
 | Y=0按鈕
Y oordinates=0 Button | 將當前坐標設置為Y軸工件坐標
Y coordinate is set to the current Workpiece coordinates axis |
…… 詳情請點擊下載
成都新宏暢無線科技有限公司
Chengdu XingHongChang Wireless Technology Co., Ltd
www.cdxhctech.com