RX7i 訂貨號 | 描述 |
| IC697VAL132 | Analog Input, 12bit, 32 channel single ended or 16channeldifferential, 0-20ma. Module has removable terminalblock, nocable required |
| IC697VAL134 | Analog Input, +/-5VDC, +/-10VDC, 0 to 10 VDC, 32 channelsingleended or 16 channel differential. Module hasremovableterminal block, no cable required |
| IC697VAL216 | Analog Input, 16 channel, jumper selectable for 0 to 5VDC, 0to10VDC, +/-2.5VDC, +/-5VDC, +/-10VDC. 16bit Resolution |
| IC697VAL232 | Analog Input, 32 Channel, jumper selectable forjumperselectable for 0 to 5VDC, 0-10VDC, +/-2.5VDC,+/-5VDC,+/-10VDC. 16 bit resolution. |
| IC697VAL264 | Analog Input, 64 Channel, jumper selectable for 0 to 5VDC, 0to10VDC, +/-2.5VDC, +/-5VDC, +/-10VDC. 16 bit resolution. |
| IC697VAL301 | Analog Output, 12 bit 32 channel, 0-10VDC, 0-5VDC,+/-2.5VDC,+/-5VDC, +/-10VDC |
| IC697VAL304 | Analog Output, Isolated, 4 channel, 12 bit, Voltage -bipolar+/-2.5VDC, +/-5VDC, +/-10VDC. Removable terminalblock, nocable required |
| IC697VAL306 | Analog Output, 12 bit, 16 channel, non isolated,Voltage/Currentjumper selectable voltage 0-10VDC, 0-5VDC,+/-2.5VDC, +/-5VDC,+/-10VDC or Current 0 to 20mA, 4 to 20mA, and 5to 25 mA |
| IC697VAL308 | Analog Output, Isolated, 8 channel, 12 bit, Voltage -bipolar+/-2.5VDC, +/-5VDC, +/-10VDC. Removable terminalblock, nocable required |
| IC697VAL314 | Analog Output, Isolated, 4 channel, 12 bit, Current - 4to20mA. Removable temrinal block, no cable required |
| IC697VAL318 | Analog Output, Isolated, 8 channel, 12 bit, Current - 4to20mA. Removable terminal block, no cable required |
| IC697VAL324 | Analog Output, Isolated, 4 channel, 12 bit, Voltage - polar0-10VDC, 0-5VDC. Removable terminal block, no cable required |
| IC697VAL328 | Analog Output, isolated, 8 channel, 12 bit, Voltage -polar0-10VDC, 0-5VDC. Removable terminal block, no cablerequired |
| IC697VAL348 | Analog Output, 8 channel, 16bit, Voltage bipolar 0 to +/-10VDC |
| IC697VDD100 | Digital Input, 24VDC, Source, 64 point. In addition,themodule can be configured for SOE (Sequence OfEvent)recording. Up to 3,000 event buffer |
| IC697VDQ120 | Digital Output, 64 point, 24VDC at 500mA, Sink or Source,64point |
| IC697VDR150 | Relay Output, 32 point, non latching, 2 amp |
| IC697VDR151 | Relay Output, 64 pint, non latching, 2 amp |
| IC697VRM015 | Reflective Memory with 256Kbyte memory & 512transferFIFO. 170MBaud fiber optic network. Supports upto 256nodes over 2,000 meters |
| IC697VSC096 | Single Board Computer, with 32Mbyte SDRAM & 96MbyteFlash |
| IC698ACC701 | Lithium Battery pack |
| IC698ACC720 | RX7i Shielded Double Slot Faceplate (Package of 6) |
| IC698ACC735 | RX7i Shielded Single Slot Faceplate (Package of 6) |
| IC698CHS017 | RX7i 17 VME Slot Rack, Rear Mount |
| IC698CHS117 | RX7i 17 VME Slot Rack, Front Mount |
| IC698CPE010 | RX7i VME 300Mhz CPU with Embedded 10/100 Ethernet |
| IC698CPE020 | RX7i VME 700Mhz CPU with Embedded 10/100 Ethernet |
| IC698ETM001 | RX7i Ethernet Module 10/100, Auto Sensing, Auto Switching |
| IC698PSA100 | RX7i PLC Power Supply, 85 to 264 VAC at 47 to 63 Hz Input,100Watt output |
| IC698PSA350 | RX7i PLC Power Supply, 85 to 264 VAC at 47 to 63 Hz Input,350Watt output |