工業用高壓空氣壓縮機,大流量、低轉速.....

主機原裝進口
工業用高壓空氣壓縮機,大流量、低轉速。
HM310-35 型空壓機為W型，3缸3級單動作活塞式壓縮。**活塞平衡，單件連桿設計。風冷無基礎，多重V帶驅動，飛濺潤滑。
用途：
水輪機調速 調相 閥門檢漏
管線試壓 PET吹瓶

風冷，W型活塞布置，單動作，三級壓縮，供貨范圍為：
THREE-CYLINDER COMPRESSOR, in “W” frame arrangement, air cooled, single effect, three-stage compression, fitted with:

可拆卸式進氣消聲過濾器，10微米精度  
Intake removable filter, with silencer.

常規慣性飛輪，2根V帶驅動
Normal inertia flywheel, for V belts transmission.

飛濺潤滑，全時低油位開關保護
Splashing lubrication to all moving parts，full-time low oil level protection switch

輕合金活塞
Light alloy pistons

鑄鐵汽缸頭，獨立閥座
Cylinder heads,, with individual valve pockets.

中間冷卻器壓力表
Air pressure gauges board.

世界氣閥**“賀爾壁格”全自動環形閥和活塞環，大流量，多動作，高效率
HOERBIGER type automatic valves, big flow area, operating much below their nominal characteristics.

SKF滾珠軸承，確保機組穩定運行
SKF main ball bearing on the end of the crankshaft

汽缸與曲軸箱之間大空間設計，避免連桿等運動部件與曲軸箱接觸
Two chamber blocks between casing and cylinders. Cylinder side chamber is large enough to avoid the piston rod part in contact with the mechanical elements could get in contact with the packing.

風冷中間冷卻器帶**閥
AIR-COOLED intercoolers between stages, furnished with safety valve.

風冷后冷卻器帶**閥
AIR-COOLED aftercooler, furnished with safety valve.

全自動卸壓系統，確保機組無荷啟動
AUTOMATIC PRESSURE UNLOADING SYSTEM, for no load starting

2級和末級冷卻器后配離心式水氣分離器
air/coolant centrifugal separators on the 2nd stage intercooler and aftercooler
全自動排污電磁閥
AUTOMATIC SOLENOID DRAIN VALVES on seperators

出氣口配排氣止回閥
CHECK VALVE on outlet


性能：
排 氣 量: 1.0m3/min  
工作壓力: 2--8 MPa
三級壓縮活塞式空壓機
電機功率: 11.5kw  15hp  
外形尺寸: 1300X860X950mm
重    量: 530kg  
可拆卸式進氣消聲過濾器，10微米精度  
飛濺潤滑，全時低油位開關保護
輕合金活塞
鑄鐵汽缸頭，獨立閥座
世界氣閥**“賀爾壁格”全自動環形閥和活塞環，大流量，多動作，高效率
SKF滾珠軸承，確保機組穩定運行
風冷中間冷卻器、后冷卻器帶**閥
全自動卸壓系統，確保機組無荷啟動
2級和末級冷卻器后配離心式水氣分離器
全自動排污電磁閥
多重V帶驅動
出口穩壓和排氣止回閥
整機經減振后安裝在全鋼底盤上