Oberdorfer泵 N1000 N2000 N3000

點擊查看大圖

產品價格： < 面議

產品型號：N1000 N2000 N3000

品牌：其它品牌

公司名稱：廣州開昱工業設備有限公司

所在地：廣東廣州

瀏覽次數：1746 次

立即詢價在線咨詢

產品簡介

Oberdorfer泵用各種工業液體移注與計量，尤其是：瀝青、燃料、油脂、膠、添加劑、聚氨酯、食品行業、石油化工、造紙、涂料油漆等行業。

Oberdorfer泵適用各種工業液體移注與計量，尤其是：瀝青、燃料、油脂、膠、添加劑、聚氨酯、食品行業、石油化工、造紙、涂料油漆等行業。

Bronze

Flow:	1-175 GPM (3 - 662 LPM)
Pressure:	0-150 PSI (0 - 10.3 BAR)
Performance:	Positive displacement. Little flow decrease with pump pressure increase. Flow increases with speed increase.
Suction Lift (water):	0-20 Ft. below pump level (0-6.1 meters)
Liquid Cleanliness and Viscosity:	Close tolerances require clean liquids. Viscous liquids require lower pump speeds.
Liquid Compatibility:	Most common liquids and compatible chemicals.
Noise:	Metal to metal gear noise very evident. metal to plastic gear noise evident.
Power Required:	Power demand increases with speed and pressure.
Discharge Line:	Positive displacement relief valve necessary to shut off.
Bearing Lubrication Required:	Carbon bearings - No Bronze bearings - No
Temperature:	Carbon bearings: - 40 to 300 degrees F (-40 degrees C to 150 degrees C) Bronze bearings: -40 to 400 degrees F (-40 degrees C to 208 degrees C)
Seal Arrangement:	Packing, Lip, Mechanical
Types:	Close Coupled & Pedestal

Flow:	0-30 GPM (0 - 87 LPM)
Pressure:	0-100 PSI (0 - 6.9 BAR)
Performance:	Positive displacement. Little flow decrease with pump pressure increase. Flow increases with speed increase.
Suction Lift (water):	0-20 ft. below pump level (0 - 6.1 meters)
Liquid Cleanliness and Viscosity:	Close tolerances require clean liquids. Viscous liquids require lower pump speeds.
Liquid Compatibility:	Chemicals and compatible liquids.
Noise:	Metal to metal gear noise very evident. Metal to plastic gear noise quieter. Plastic to plastic gear noise most quiet.
Power Required:	Power demand increases with speed and pressure.
Discharge Line:	Positive displacement relief valve necessary to shut off.
Bearing Lubrication Required:	No
Temperature:	-40 degress F. to 400 degrees F. (-40 degrees C to 208 degrees C)
Seal Arrangement:	Mechanical or packing
Types:	Close coupled & Pedestal

Flow:	0-35 GPM (0-132.5 LPM)
Pressure:	0-500 PSI (0 - 34.5 BAR)
Performance:	Positive displacement. Little flow decrease with pump pressure increase. Flow increases with speed increase.
Suction Lift (water):	0-20 ft. below pump level (0 - 6.1 meters)
Liquid Cleanliness and Viscosity:	Close tolerances require clean liquids. Viscous liquids require lower pump speeds.
Liquid Compatibility:	Petroleum products, solvents and oils, non-corrosive liquids, liquid propane.
Noise:	Helical gear design quiet.
Power Required:	Power demand increases with speed and pressure.
Discharge Line:	Positive displacement relief valve necessary to shut off.
Bearing Lubrication Required:	Carbon bearings - No
Temperature:	-40 degrees F. to 250 degrees F. (-40 degrees C to 122 degrees C)
Seal Arrangement:	Mechanical or packing
Type:	Close coupled & Pedestal

PPS Plastic (Polyphenelene Sulphide)

Flow:	0-30 GPM (0-87 LPM)
Pressure:	0-100 PSI (0 - 6.9 BAR)
Performance:	Positive displacement. Little flow decrease with pump pressure increase. Flow increases with speed increase.
Suction Lift (water):	0-20 ft. below pump level (0 - 6.1 meters)
Liquid Cleanliness and Viscosity:	Close tolerances require clean liquids. Viscous liquids require pump speeds.
Liquid Compatibility:	Most corrosive liquids and chemicals.
Noise:	Plastic gear noise most quiet.
Power Required:	Power demand increases with speed and pressure.
Discharge Line:	Positive displacement relief valve necessary to shut off.
Bearing Lubrication Required:	Carbon bearings - No
Temperature:	-20 degrees F. to 180 degrees F. (-29 degrees C - 82 degrees C)
Seal Arrangement:	Mechanical, lip, or packing
Types:	Close coupled & Pedestal